Computed Radiography vs. Traditional Film Radiography Webinar: Is Your Operation Ready to Transition? - Braun Intertec

你知道计算y射线照相法适合our operation? With the right set of tools and knowledge, the transition from traditional film to digital is more straightforward than you’d think. With computed radiography rising in popularity, fabricators, constructors, foundries, and manufacturers are learning the value of qualified NDT technicians to implement the cost-saving computed radiography processes.

Watch the recorded version of the webinar as our NDT experts, Ken LeBlanc and Wesley Soape from the La Porte, Texas Braun Intertec office, dive into the benefits of computed radiography.

Learn more about:

The difference between traditional film radiography and computed radiography
The importance of well-trained computed radiography technicians
Choosing the right radiography method for your project
How computed radiography enhances project safety

Complete the form below to watch a recording of the webinar.

Meet the Speakers

Ken LeBlanc
Nondestructive Examination Operations Manager – Gulf Coast

Ken is an ASNT NDT Level-III in UT, RT, MT, PT and VT / AWS CWI based in our La Porte, Texas office, brings 29 years of experience, leadership, project management experience and technical expertise serving clients within the fabrication, process, refining and transportation sectors across Texas.

Wesley Soape
Nondestructive Examination Technician Level III

Wesley has over 13 years of experience as a nondestructive technician in a variety of industries including manufacturing, subsea, aerospace, midstream oil & gas, and energy production. Wesley is based in our La Porte, Texas office.

Other Articles You Might Like

White Paper

February 13, 2018

Structure Support On Laterally Swept Piles

Anyone who has observed a significant number of piles has seen that, inevitably, the pile is not perfectly straight after driving. In spite of the best efforts of contractors, there are a whole host of reasons for piles to end up out-of-plumb or to have a curve, sometimes referred to as pile sweep. For two, recent projects with numerous swept pile, the available research was determined to be limited in application given the investigated pile sizes, lengths and measured sweep. As a result, the project team chose to perform static load testing to evaluate the ultimate resistance of the swept...

Webinar

October 17, 2018

[OnDemand Webinar] Implementing a Successful Roof Asset Management Plan

Understanding the performance and remaining service life of facility assets can be challenging. This is especially true if you own multiple buildings or facilities across different geographies. Knowing a building’s assets can provide a benchmark to optimize life cycle costs and improve reliability of facility assets across an organization’s entire portfolio. By establishing a roof asset management program, information pertaining to facilities components, such as roofs, enables owners to make better decisions and more complete budget forecasts with greater accuracy around decisions for repair or replacement/capital expenditures. One of the most important parts of an asset management program is turning...

Article

April 10, 2020

领导Spotlight with Gene Murray: Vice President of Sales

We recently spoke with Gene Murray to learn more about his new role as Vice President of Sales at Braun Intertec. We asked Gene about his background, what his favorite part of his role is, and what he feels makes Braun Intertec unique. What is your current role at Braun Intertec?I am the Vice President of Sales, so my team is responsible for bringing in new clients to the company. What is your professional background?I received a bachelor’s degree in Environmental Earth Science from the University of South Dakota. I’ve also received a master’s degree in Hydrogeology from the University...