What are F-numbers, and why do they Matter?
F-numbers, determined in accordance with ASTM E 1155, are the widely accepted measurements for evaluating flatness and levelness of concrete slabs. Modern-day floor flatness and levelness test methods have made life easier for designers and end users of facilities with concrete floor slabs. In the not too distant past, concrete floor flatness was measured by laying a ten-foot straightedge on a finished floor and measuring the gap between the straightedge and the concrete over the span. If the gap was measured to be 1/8thinch or less it was commonly considered to meet specifications.
As you can guess, this method was not very reliable. Measuring floor flatness with the straightedge method typically resulted in uneven floors which caused many unforeseen problems. You might be wondering how problematic can uneven floors really be? Turns out they can cause some major problems, including:
- Profit loss of distributors and manufacturers due to damaged forklifts used to move product
- Loss of product due to uneven floors near product racking areas
- Lost productivity due to employee injuries as a result of unsafe transporting of product
How does it work?
Since then, more reliable methods have developed utilizing point-to-point measurements that produce data which can be used to develop a profile of the surface being measured in the form of a graph. As point-to-point measurements are obtained and data collected, differences in elevations at each point are recorded and visually represented by wavelengths. Multiple measurements are obtained throughout the field of the concrete floor surface. The data is collected using a floor profiler or equivalent.
通过利用由此开发的F编号系统将数据转换为可用的结果American Concrete Institute(ACI 117) and theCanadian Standards Association (CSA A23.1)standard for the specifications and measurement of concrete floor flatness. FFNumbers represent floor flatness and FLNumbers represent floor levelness.
Measuring Floor Flatness and Levelness
Typical FFand FLvalues for lightly-trafficked office/industrial buildings are 25 and 20 respectively; warehouse floors with moderate or heavy traffic range from 35 and 25; and movie and television studios are >50 and >50. Overall FFand FLvalues, individual test runs and required local minimum values are both considered when evaluating compliance with specifications designed to accommodate the use of the facility.
FF andFLnumbers will diminish with time as joint shrinkage and slab curling occur making floors less flat. For this reason, flatness and levelness testing is recommended within 24-hours after concrete placement, but no later than 72 hours to achieve accurate results.
Improved floor flatness can help your bottom-line and support a safe environment for employees. Braun Intertec has performed floor flatness/levelness tests on a variety of industrial and commercial buildings throughout Iowa, Kansas, Louisiana, Minnesota, North Dakota, Texas, and Wisconsin. Using this test data we can assess whether our readings meet your project specifications. For more information about floor flatness testing or our othermaterials testingcapabilities in the Houston area, contact Larry Goodrich.